Permatex Cold Weld Steel Reinforced Epoxy, 2x28g Tube

81374

Details:

A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300F intermittent. Over 3,000 PSI shear strength on steel.

Application:

Automobile

Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings

Heavy Duty

Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings

Marine

Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings

Instruction:

DIRECTIONS:

1. Surface must be clean, dry and free from grease and dirt. Use PermatexBrake and Parts Cleaner for best surface preparation; use isopropyl alcohol on plastics. To improve bond strength, roughen bond area with coarse sandpaper or wire brush prior to application.
2. Squeeze out equal amounts of weld agent and hardening agent; mix thoroughly until color is uniform.
3. Apply to surface being repaired and remove excess material immediately.
4. Sets in 8 minutes. Allow 16 hours (overnight) before returning part(s) to service.